ESi Electronic Room Thermostat With Neon Indicator – ESRTE2

ESi Electronic Room Thermostat with Neon Indicator

The ESi Controls ESRTE2 Electronic Room Thermostat is an economical and simple to use room thermostat. To control your room temperature, simply turn the control dial until your desired temperature is showing at the temperature mark. When you turn the dial past the current temperature, the neon indicator will light up when the system is being turned ON (if calling for heat when turning the temperature up) or will turn off when the system is being turned OFF (if not calling for heat when turning the temperature down). This allows you to always tell if the system is ON or OFF. The temperature can be set between 5°C to 30°C.

The stylish range of Electronic Room Thermostats from ESi Controls are designed to outperform many older thermostats and should be able to produce savings in the order of 10% over and above those achieved by traditional units using older technology. The temperature control accuracy of +/- 0.6°C will reduce the temperature swing that normally occurs with older style thermostats.

The ESRTE2 is a three wire thermostat, requiring a live and neutral power supply of the appropriate voltage, with an easy fit back plate for quick and easy installation.

• Large, clear adjsutable dial
• Neon indicator when system is turned ON/OFF
• Double insulated
• Surface mounted
• Temperature control accuracy of 0.6°C
• Easy fit back plate
• Easy to use and quick to install

Making the decision on the most suitable sort of Heating Control is a major decision. When you determine that Room Thermostats give the appropriate solution then the ESi Electronic Room Thermostat with Neon Indicator – ESRTE2 is certainly worth seriously thinking about.