Gledhill Economy 7 FTI110 Indirect Vented 1200mm X 400mm EnviroFoam Combination Cylinder 103/28 Litre – BEICT05

Gledhill Economy 7 Indirect Vented Combination Cylinders

Indirect – Heated via an external heat source such as a boiler. Can also be heated via an electric immersion heater.

Open Vented – Conventional Cylinder, fed by a header tank in the loft.

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced.

Gledhill Economy 7 Direct Vented Hot Water Cylinders at PlumbNation are a range of electrically heated traditional vented hot water cylinders designed to make the most of electric off-peak tariffs. Gledhill Vented Cylinders are desgined to supply hot water for single or multi bathroom properties and are available in standard capacities from 120 litre to 210 litre.

• Supplied complete with factory fitted cold water inlet baffle to improve hot water draw off
• EnviroFoam insulation – environmentally friendly
• Re-heat time of 25 minutes
• Incredibly light – weighing as low as 12kg (smaller models)
• Compliant with 2010 Part L Building Regulations
• 100% recyclable
• Low standing heat loss
• Wide range of sizes available
• Fast delivery
• 10 Year Manufacturers Guarantee

Image is for illustrative purposes only. Product may differ slighty from image.

Insulation adds 70mm to the diameter of the Cylinder

Please note – Vented Cylinders are not supplied with an immersion.

Selecting the most suitable sort of Cylinder is a key decision. When you decide that Indirect Combination Cylinders are the appropriate solution then the Gledhill BEICT05 is unquestionably worth a serious look.