Gledhill Economy 7 FTI140 Indirect Vented 1500mm X 400mm EnviroFoam Combination Cylinder 140/25 Litre – BEICT07

Gledhill Economy 7 Indirect Vented Combination Cylinders

Indirect – Heated via an external heat source such as a boiler. Can also be heated via an electric immersion heater.

Open Vented – Conventional Cylinder, fed by a header tank in the loft.

The combination cylinder is specifically designed to be installed into properties without a loft space ie apartments etc. With the feed tank being incorporated into the combination unit, a separate cold water storage tank is not required, therefore installation is simplified and costs reduced.

Gledhill Economy 7 Direct Vented Hot Water Cylinders at PlumbNation are a range of electrically heated traditional vented hot water cylinders designed to make the most of electric off-peak tariffs. Gledhill Vented Cylinders are desgined to supply hot water for single or multi bathroom properties and are available in standard capacities from 120 litre to 210 litre.

• Supplied complete with factory fitted cold water inlet baffle to improve hot water draw off
• EnviroFoam insulation – environmentally friendly
• Re-heat time of 25 minutes
• Incredibly light – weighing as low as 12kg (smaller models)
• Compliant with 2010 Part L Building Regulations
• 100% recyclable
• Low standing heat loss
• Wide range of sizes available
• Fast delivery
• 10 Year Manufacturers Guarantee

Image is for illustrative purposes only. Product may differ slighty from image.

Insulation adds 70mm to the diameter of the Cylinder

Please note – Vented Cylinders are not supplied with an immersion.

Selecting the correct sort of Cylinder is an important decision. After you decide that Indirect Combination Cylinders deliver the right answer then the Gledhill Economy 7 FTI140 Indirect Vented 1500mm x 400mm EnviroFoam Combination Cylinder 140/25 Litre – BEICT07 is certainly worth considering.